Kodak 100/120EX - Manual (Page 11)

1-8 A-61544 January 2008
Scan Station
components The Kodak Scan Station 100 consists of a scanner, control panel and
touch screen.
Front view
1 Input tray — holds up to 50 sheets of paper.
2 Function window — displays 1 through 9 or an “E” indicating
Error. See Chapter 4, Troubleshooting for a listing of these error/
status codes.
3 Indicator LED light — illuminates or flashes indicating Scan
Station status.
• Steady green: ready to scan
• Flashing green: preparing to scan
• Flashing red: error indication such as, Cover Open, in
conjunction with the Function window displaying an “E”. See
Chapter 4, Troubleshooting for a listing of these error/status
codes.
4 Turret — can be rotated for ease-of-use and viewing.
5 Touch screen — with a simple touch, allows you to easily navigate
through selections instead of using the control panel.
6 Control panel — see the Control panel description on the next
page.
7 USB port — use this port to insert your USB flash drive.
8 Output tray — collects the scanned documents.
NOTE: The Special Document Feeder (not shown in illustration) —
provides a flat work surface for scanning small-sized documents
one at a time.
9 Output tray extension — unfold this extension when scanning
documents longer than 8.5 x 11 inches (A4).
10 Cover — provides access to the internal components of the Scan
Station, such as the imaging guides and feed module.
1
2
3
4
5
6
8
9
10
11
12
7