Kodak 100/120EX - Manual (Page 16)

A-61544 January 2008 2-3
• Open the extender on the output tray.
NOTE: The Special Document Feeder requires no special adjustments.
Using the control
panel and touch
screen
The Kodak Scan Station 100 provides a touch screen and control panel
for easy access and operation. You can use either the touch screen,
control panel, or a combination of both.
For the purpose of this manual, actions referred to in the procedures
are explained by using the touch screen, except for scanning your
documents, which is triggered by pressing the green Go button. The
Scan Station will initially display the destinations and settings that have
been set up by your system administrator. You can change these
default settings for your session by touching the Settings button. When
you change these default settings, they will be enabled only for the
current session. After your job completes, the Scan Station reverts to
the default settings in preparation for the next user. Refer to the section
entitled, “Customizing the Scan Station using a personal configuration
file on a USB flash drive” later in this chapter for more information.