Kodak 100/120EX - Manual (Page 68)

A-61544 January 2008 3-25
Specifying Proxy settings If your company requires the use of a proxy server before
communicating with an FTP site, define these proxy settings by clicking
on the Proxy button. The Proxy Settings dialog box will be displayed.
1. Select the Proxy Type. USER after login and None are the only
two supported options at this time.
2. If USER after login is selected, the rest of the fields are available.
Enter the Proxy Address in the form of a Fully Qualified Domain
Name (e.g., FTP.acme.com) or as an IP address.
3. Enter the Username and Password required to access the proxy
server.
4. If the proxy server is configured to communicate on a port other
than Port 21, change or enter the value using the up and down
arrows or keyboard.
5. Click OK.