Konica Minolta Dimage Scan Elite F-2900 - Manual (Page 23)

SETTING THE PREFERENCES
21
1. Click on .
Auto Expose for Slides checkbox
Close Driver software After Scanning checkbox
Digital ICE Setting box
2. Set the preferences as desired.
Select this checkbox when scanning underexposed slides.
Closes the scanner's driver software after the scan is complete.
Select the DIGITAL ICE (removing dust or scratch) from OFF and ON.
This function is not avaialble for monochrome film.
Color depth Setting box
The pixel depth of each color channel used to scan your image (RGB or CMY). Three
options are available:
• 8-bit – over 16.7 million colors
• 16-bit – over 2.8 billion colors
• 16-bit linear – same as 16 bit, but image correction is not applied when the image is
scanned.
3. Click on to accept the new preference settings.
• Changes to the Preference settings take effect immediately.
Multi-Sample Scanning Setting box
This function reduces the random noise by referring the average of the result while
scanning several times.
Select the times of scanning operation from OFF, 2 times, 4 times, 8 times and 16 times.
COLOR
MATCHING
Settings (See
page 66.)
APS Settings
(See page 57.)
The Preference Dialog Box — Name of parts