Konica Minolta Dimage Scan Elite F-2900 - Manual (Page 4)

2
SYSTEM REQUIREMENTS – PC AT
CPU:
Operating System:
Memory:
Monitor:
Other:
Windows 95 (incl. OSR2), Windows 98, or Windows NT 4.0.
A minimum of 32 MB RAM.
XGA (1024 x 768) or better. VGA (640 x 480) can be used.
SCSI Board: The following Adaptec SCSI boards are recommended for this
device:
AVA-1505AE AVA-2902E AHA-1510B
AHA-1520B AHA-1540CP AHA-2940
AHA-2940J AHA-2940U AHA-2940N
AHA-2940AU AHA-2940W AHA-2940UW
AHA-2910B AHA-2910C AHA-2920C
• The AHA-2940N SCSI board has been tested and approved for use
on NEC PC-9821 series machines.
• Do not use AVA-1505AE, AHA-1520B, and AHA-1540CP SCSI
boards with NEC PC98NX Series machines.
• Support will not be provided for malfunctions or problems caused by
the use of untested SCSI boards.
• Depending upon the SCSI board an optional adaptor may be
required.
Hard Disk Space: 90 MB of available hard disk space.
IBM PC/AT compatible with An Intel Pentium or later processor
or better.
An Intel Pentium or later when Windows NT 4.0 is installed.
• Support cannot be provided for custom or home built machines.
TWAIN driver is compatible with Photoshop ver. 3.05, 4.0.1, and
5.0.2.
Photoshop LE Ver. 5.0
Paint Shop Pro 5.0E, Corel Photo Paint 8.