Konica Minolta bizhub 750 - Manual (Page 128)

Basic Copy Operations 3
bizhub 750/600 3-29
Ba
sic Copy Op
er
ations
Chapter 3
3.6 Specifying a Zoom Setting
The zoom ratio can be set in order to make a copy on paper with a size dif-
ferent than the original or to enlarge or reduce the size of the copy image.
The following procedure describes how to specify the Zoom setting.
Automatically Selecting the Zoom Ratio (“Auto Zoom” Setting)
The most appropriate zoom ratio is automatically selected based on the size
of the positioned original and the specified paper size.
0 The default setting is “×1.0”.
0 The “Auto Zoom” and “Auto Paper Select” settings cannot be selected
together. If the “Auto Paper Select” setting was selected, the Paper
screen appears. In the Paper screen, specify the desired Paper setting.
1
In the Basic screen, touch [Zoom].
The Zoom screen appears.
2
Touch [Auto Zoom].
3
Touch [OK].
The Basic screen appears again.