Konica Minolta bizhub 750 User Manual
Page 190
Additional Copy Operations
4
bizhub 750/600
4-15
Addition
al Copy Op
era
tions
Chapter 4
4
Touch [Check Job].
The Mode Check screens for the copy job appear.
The buttons for functions where the setting has been changed from the
default appear selected.
5
Check the copy settings registered with the selected copy program.
6
Touch [Job End].
The Recall Copy Program screen appears again.
?
Can different settings be displayed?
% To display the previous screen, touch [←Back]. To display the next
screen, touch [Fwd.
→].
7
Again touch the button for the program with the desired copy settings.
8
Touch [OK].
–
If [OK] is touched with no copy program selected, the Basic screen
appears again without a copy program recalled.
The selected copy program is recalled and the Basic screen appears
again.
9
Press the [Start] key.
Copying begins with the recalled copy settings.