Konica Minolta bizhub 750 - Manual (Page 165)

3 Basic Copy Operations
3-66 bizhub 750/600
Ba
sic Copy Op
er
ations
Chapter 3
3.12 Specifying Folding Settings
If options are installed, copies can be folded before being fed out. The fol-
lowing Folding settings are available. The available settings differ depending
on the options that are installed.
Copies can be folded in half or in three or bound at the center only if finisher
FS-602 is installed.
Copies can be Z-folded only if Z-folding unit ZU-602 is installed on optional
finisher FS-504 or FS-602.
Setting Description Compatible
Models
Half Fold Select this setting to fold copies in half before feeding
them out. FS-602
Fold & Staple Select this setting to staple copies at two places along
the center, and then fold the copies in half before feed-
ing them out. FS-602
Z-Fold Select this setting to fold copies at the center, and then
fold them in half again before feeding them out. (Z-
folding unit ZU-602 must be installed.) FS-504
FS-602