Kyocera QCP 6035 - Manual (Page 11)

What to do first 5
Turning your phone on for the first time
Wait until the battery is fully charged before using your phone for the
first time.
1. With the flip closed, press and hold for a few seconds. You see
the message “Powering on” on the screen.
2. Open the flip and follow the procedures in the welcome screens to
calibrate the screen. If the welcome screens do not appear, see
“Calibrating the screen” on page 12.
For more information: If the phone does not turn on, see “Where to find help” on
page 51. To install the Kyocera smartphone desktop software on your computer,
see “Synchronizing your phone with a computer” on page 45. For more
information on the battery, see Chapter 1, “Introducing the Kyocera
Smartphone,” in the Reference Guide on the CD-ROM.
IMPORTANT: Charge the battery
completely before first use.
If the battery is totally drained, it may take
6–8 hours to charge the first time. After the
first time, it is not necessary to recharge the
battery fully; you can use the phone with a
partial charge.
If you purchase an extra battery, you can
charge it in the rear port on the sync cradle.
Rear port for
extra battery
Front port
for phone