Kyocera QCP 6035 - Manual (Page 48)

42 Kyocera QCP 6035 Smartphone User’s Guide
Beaming information
Using the phone’s infrared (IrDA) port, you can “beam” information such
as addresses, memos, or appointments to other devices with infrared
ports. To receive beamed information, the beam receive feature must be
turned on. See step 5 on page 37.
To beam information
1. Locate the entry you want to beam.
2. Tap to open the menus. From the Record menu, tap Beam.
3. Point the top of your phone at the infrared port of the receiving device.
For best results, the devices should be approximately 5–30 centimeters
(2–12 inches) apart, and the path between them must be clear of
obstacles.
4. Wait for the Status message to indicate that the transfer is complete.
See Chapter 4, “Transferring Information,” in the Reference Guide.
May be either on or off
Open