Using data/fax mode, To set up data/fax mode – Kyocera QCP 6035 User Manual
Page 46
40
Kyocera QCP 6035 Smartphone User’s Guide
Using Data/Fax mode
You can use the built-in wireless modem in your Kyocera smartphone
just like a standard external modem to your PC or laptop. You can also
use it to send or receive faxes from the PC. Notice, however, that you
cannot make or receive voice calls or use any other applications while the
modem is in Data/Fax mode. Incoming phone calls receive a busy signal.
Opening any other application terminates the modem call.
To set up Data/Fax mode
1.
Tap
to view the Applications
Launcher.
2.
Tap
to open Data/Fax mode.
3.
Tap
to open the menu.
4.
From the Options menu, tap
Settings.
These settings identify the
serial communications settings
between your computer and the Kyocera smartphone.
5.
Match your computer’s settings to these values. You can change these
settings if necessary. Refer to your computer user guide.
6.
Tap Done.
On
Open