Kathrein UFD 580 - Manual (Page 35)

TVTV EPG and Timer
35
You can use the

buttons to switch to the details on the next
programme in the selected view. Press

to return to the previous
display, such as the programme list.
Programming a Recording
You can programme a recording from the various views of the
EPG (“Current”, “Program list”, “Highlights” and “Det.information”
[Details]) and from within their various submenus.
Programming is pre-configured for two SAT IF input signals. If you are
operating the receiver in Loop mode (“LNB 1 Loop out” output on
“LNB 2 in” input), this may cause problems when two programmes are
recorded at once (if both programmes are not transmitted on the same
transponder).
Use the arrow buttons (

) to select the programme you
want and press the red

button. The following display appears
(example):
If no EPG data is available for
the channel you selected:
In the “Current” view select the
channel for which you want to
programme a recording and
press the red
 button. As
there is no EPG data, you must
enter the data (date, start, end)
manually. Use the arrow buttons
(
 ) and number
buttons to make your input.
Press

to save your settings.