Kathrein UFD 580 - Manual (Page 60)

Programme List
60
The entry is made using the

buttons and the number pad
buttons.
You can set:
• the satellite being received,
• the transponder and transponder frequency,
• the polarisation and
• the symbol rate.
The following items:
• Name,
• Video PID (Programme Identification),
• Audio PID,
• PCR PID (PCR = Programme Clock Reference)
will only accept alphanumeric or decimal entries.
Incorrect PID entries are rejected.
Press

to acccess the channel list. You will see a message
confirming that your changes have been saved and the info display for
the current programme being viewed will appear on the screen for a
few seconds. The new programme is added to the existing channel
list.
You can obtain the necessary PIDs from relevant magazines or the
Internet, as well as from the SAT 1 Videotext (Teletext) service. Refer
to “Operating Instructions” section for information on how to make
alphanumeric entries.
Never change the PID information without good reason as they affect
identification of the reception signal.
This function is only necessary for programmes which are not
broadcast according to the DVB standard. All programmes that
comply with the standard are recognised and saved by the
automatic search.