Kenwood KDV-MP765 - Manual (Page 14)

14 | English
Station Preset Memory
Putting the station in the memory.
1
Select the band
Press the [BAND] button.
2
Select the frequency to put in the memory
Press the [ 4] or [¢] button.
3
Put the frequency in the memory
Press the desired [1] — [6] button for at least
1 second.
On each band, 1 station can be put in the
memory on each [1] — [6] button.
Auto Memory Entry
Putting stations with good reception in the
memory automatically.
1
Select the band for Auto Memory Entry
Press the [BAND] button.
2
Open Auto Memory Entry
Press the [AME] button for at least 1 second.
When you reach the end of frequency band, the
Auto Memory Entry completes automatically.
Preset Tuning
Calling up the stations in the memory.
1
Select the band
Press the [BAND] button.
2
Call up the station
Press the desired [1] — [6] button.
Scan Tuning
Tunes the receivable stations one by one every
approximately 5 seconds.
1 Select the band
Press the [BAND] button.
2 Start Scan Tuning
Press the [ENT./ £] button.
When it’s ON, "SCN" indicator is ON.
3
When you have tuned the desired station
Press the [ENT./ £] button.
Local Seek
Only stations whose reception is good are
searched for in auto seek tuning.
Press the [LO.S] button for at least 1 second.
Each time the button is pressed the Local Seek
turns ON or OFF.
When it’s ON, "LO.S" indicator is ON.
Tuner features