Connecting wires to terminals – Kenwood KDV-MP765 User Manual
Page 36
Advertising
36
|
English
Connecting Wires to Terminals
Using the Relay Connector
(Accessory 6)
1
Plug the vehicle's harness into the relay
connector.
2
Plug the parking brake detection wire into the
relay connector.
3
Lock the cable clamp.
4
Press down using pliers until the conductive
metal is even with the plastic surface.
5
Lock the lid.
1
2
Detection wire
Vehicle
harness
3
Relay
connector
4
5
Cable clamp
Lid
Conductive metal
Advertising
This manual is related to the following products: