Kenwood KDV-MP765 - Manual (Page 40)

40 | English
?
A VCD cannot be played using menus.
 The VCD disc being played is not compatible with
P.B.C.

Menu playback is available only with VCD discs
recorded with P.B.C.
?
The subtitle is not displayed.
 The DVD disc being played does not contain the
recording of subtitles.

The subtitle cannot be displayed when the
DVD disc being played does not contain the
recording of subtitles.
?
The voice (or subtitle) language cannot be
changed.

The DVD disc being played does not contain the
recording of more than one audio (or subtitle)
language.

The voice (or subtitle) language cannot be
changed when the DVD disc being played
does not contain the recording of more than
one voice (or subtitle) language.
?
The viewing angle cannot be changed.
 The DVD disc being played does not contain the
recording of more than one angle.

The viewing angle cannot be changed when
the DVD disc being played does not contain
the recording of more than one angle.
 You are attempting to switch the angle in a
DVD section where more than one angle is not
recorded.

More than one viewing angle may be
recorded only in limited sections in a disc.
?
Playback will not start even after a title is
selected.

A viewing restriction (RATING) has been set for the
disc.

Check the viewing restriction level (RATING)
setting.
?
The voice or subtitle language selected in the
initial setting is not played.

The DVD disc being played does not contain
the recording of the selected voice or subtitle
language.

Use a DVD disc containing the recording of
the selected voice or subtitle language.
MP3 source
?
Cannot play an MP3/WMA.
 The media is scratched or dirty.
 Clean the media, referring to the CD cleaning
of the section on 'About DVD/CDs' (page 8).
?
The sound skips when an MP3 is being played.
 The media is scratched or dirty.
 Clean the media, referring to the CD cleaning
of the section on 'About DVD/CDs' (page 8).
 The recording condition is bad.
 Record the media again or use another media.
?
The MP3 track time isn’t displayed correctly.
 ---
 There are times when it isn’t displayed
correctly according to the MP3 recording
conditions.
The messages shown below display your
systems condition.
No Disc: The DVD/CD is quite dirty. The DVD/CD is
upside-down. The DVD/CD is scratched a
lot.

Clean the DVD/CD and load it correctly.
No DVD/CD in the unit.

Insert the DVD/CD.
Disc Error: The DVD/CD is quite dirty. The DVD/CD is
upside-down. The DVD/CD is scratched a
lot.

Clean the DVD/CD and load it correctly.
Unknown Disc: The disc of this format cannot be played
back.
Region Error: The DVD software encoded for other
region code.
Loading: The unit is reading the data on the disc.
Error: The DVD/CD mechanism does not operate
normally.

Hold down [ 0] button more than 5
seconds, and the DVD/CD mechanism
will be reset.
Mecha Error: The unit is malfunctioning for some reason.
 Press the reset button on the unit. If the
"Mecha Error" code does not disappear,
consult your nearest service center.
Troubleshooting Guide