KVH Industries TracVision 6 - Manual (Page 86)

Maintenance Port Parser Commands
54-0166 91
Apply Default Values to Default Satellites
Function: updates the default satellites to the default values
Command: SATPAIR,X
Response: displays numerous frequency commands and
reports “Satellite Installation Complete”
Where: X = 0 (satellites default to Astra1 & Hotbird)
or
X = 1 (satellites default to Expressvu and
EchoStar 119)
or
X = 2 (satellites default to DSS_101 and
DSS_119)
or
X = 3 (satellites default to Galaxy3CN and
None)
Report Last Satellite Tracked/Update Value
Function: reports the last satellite tracked or updates the last
tracked satellite to the value input if it is different
from the current value
Command: LASTSAT
LASTSAT,X
Response: Last = <sat_name>
Where: X = A (updates to Satellite A)
or
X = B (updates to Satellite B)