Kathrein UFD 430 - Manual (Page 12)

Receiver operation
12
The switching voltage on pin 8 of the TV Scart socket is turned off, and it is turned
on again by pressing once more.
In Sat mode, “Sat mode“ is displayed on the screen, the programme slot indicator
in the LED display begins with “P...“.
In TV mode, “TV mode“ is displayed on the screen, the programme slot indicator in
the LED display begins with “T...“.
Setting date and time
•
Press the key to call up the menu for date and time setting, and turning the
continuous time display on/off.
The following screen display appears:
In this menu you can set the date and time and also turn on a continuous time dis-
play on the screen.
The bottom menu line shows keys you can use to make the settings.
Making the settings
•
Select the menu line using the keys.
The chosen menu entry flashes.
•
Change the setting for continuous time display (ON/OFF) using the
keys.
•
For the direct entry of numerals use the ... keys.
Always enter the date as 6 positions and the time as 4 positions,
or
•
Change the values step-by-step using the keys.
Saving settings and starting the clock
After entering the time press the key in order to start the clock.
Return to receive mode
•
Press the key to return to receive mode.
or
•
Press the key to continue with the timer programming.