Konica Minolta DiMAGE Scan Dual III AF-2840 - Manual (Page 47)

Click on the file name to highlight it. Click the OK but-
ton to select the settings to apply to the image displayed in
the exposure-control tab. Confirm the autoexposure settings
in the preference window (p. 44). Click the apply button to
view the results.
To delete a setting file, open the load window and click on
the file name to highlight it. Use the keyboard delete key to
erase the file.
Loading exposure settings
Saving exposure settings
Click the apply-all button to use the exposure-control settings for
all the images in the film holder. If autoexposure is used, the
exposure setting for the displayed image is fixed and applied to
the other images in the holder.
Adjust the sliders or enter values between ±2 in 0.1
increments in the text boxes. Press the apply button to
view the effect on the preview image. Repeat until the
desired result is achieved. To cancel all settings, click
the reset button and press the apply button to initialize
the preview image.
When using autoexposure, adjustments are made in ref-
erence to the exposure determined by the AE system.
To calibrate the scanner in reference to a standard
exposure, turn the autoexposure functions off in the
preference window (p. 44); set exposure control for neg-
atives to manual or uncheck the auto-exposure for
slides check box. This is recommended when making settings for specific films.
47
To cancel changes to exposure once the apply-all function has been used, click the reset button,
then the apply-all button.
Click the save setting button to open the save win-
dow.
Enter the name for the setting file. Click the OK but-
ton.
Click the load setting button to open the load win-
dow.