Konica Minolta DiMAGE Scan Dual III AF-2840 - Manual (Page 57)

Frequently used scan settings can be saved.
A Job file can be deleted. Once deleted, it can not be recovered.
Saving scan settings as a Job
Deleting a Job
With the settings to be saved in the scan setting window, click
the save Job button. The Job-registry dialog box will open.
Select the category in which to save the settings from
the drop-down menu.
Enter the Job name. Click OK to save the settings. See
page 42 to load a Job.
Select the Job file to be deleted from the Job categories
in the selection window. Use the following key(s) to
delete the selected file:
Windows – delete key
Macintosh – command key + D.
Click the load Job button.
57