KORG Performance Synthesizer PS60 - Manual (Page 16)

13
MOTU – Digital Performer 7
1
2
Start up Digital Performer 7.
Create an instrument track. Start up the “PS60 Plug-In Editor.”
Instrument Track
3
Create a MIDI track. Choose the “PS60 Plug-In Editor” as the output of that MIDI track.
Tracks Windows – MIDI Track
4
To route the PS60’s audio signal to Digital Performer 7, create an audio track or an AUX
track.
On the input section of that track, select the audio interface input where you’ve
connected the PS60’s audio signal.
Tracks Windows – MIDI Track
5
If you’re routing the PS60’s audio signal to an audio track, arm the REC button so that
you can hear the audio signal.
If you are routing the PS60’s audio signal to an AUX track, this step is not necessary.
Audio Track