KORG Performance Synthesizer PS60 - Manual (Page 21)

18
Basic functions and operation
Start-up
PS60 Editor
• From the “KORG”–“PS60” folder, start up the “PS60 Editor.”
Note: When you start up the editor, the PS60 programs and other settings can be loaded
automatically. (See p.31 “Software Setup (Initial settings for the PS60 Editor)”)
Don’t touch the keyboard or the mouse of your computer while data is being sent or received.
Windows XP / Windows Vista / Windows 7
Access the “KORG” folder from the taskbar via [Start] – [All Programs].
Mac OS X
The “KORG” folder is located in the “Applications” folder.
PS60 Plug-In Editor
For details on starting-up the PS60 Plug-In Editor, refer to the section for your host application in
“Setting up the PS60 Plug-In Editor” (
) p.8).
Note: When you start up the editor, the PS60 programs and other settings can be loaded
automatically. (
) p.31 “Software Setup (Initial settings for the PS60 Editor)”)
Don’t touch the keyboard or the mouse of your computer while data is being sent or received.
About the Preload data
Start up the PS60 Editor, and use the Receive All function to load all data into the PS60 Editor.
Then save this data to a file as preload data.
You can now create a setting for this data file to be automatically loaded when you start up the
PS60 Editor, the start-up time will be shortened because you won’t need to load the data from the
PS60.
( ) p.31 “Software Setup (Initial settings for the PS60 Editor)”)