KORG Performance Synthesizer PS60 - Manual (Page 8)

5
Installation in Mac OS X
To install the PS60 Editor and PS60 Plug-In Editor into Mac OS X, use the following procedure.
You must install the KORG USB-MIDI Driver if you want to connect the PS60 to your
computer via USB and use the PS60 Editor or the PS60 Plug-In Editor. (For details on
installing the KORG USB-MIDI Driver, refer to the Install Guide.)
1
2
Insert the included CD-ROM into your CD-ROM drive.
Start up the installer by double-clicking on “PS60 Editor Installer.pkg” located in the
“PS60 Editor” folder of the CD-ROM.
3
Depending on the version of your Mac’s operating system, a confirmation dialog box may
appear at this point. If
required, please enter your password and click [OK].
When the installer starts up, the following screen will appear. Click [Continue].
4
5
“Important information” will appear. Read the contents, and click [Continue].
The “License agreement” will appear. Carefully read the contents, and click [Continue].
A dialog box will ask whether you accept the terms of the license agreement. If you
accept, click [Agree].