Using default settings to print a picture – Kodak ESP OFFICE 2100 User Manual
Page 54
Printing
48
www.kodak.com/go/aiosupport
Using default settings to print a picture
Unless you change the default settings, the default for printing pictures is one
4 x 6 in. / 10 x 15 cm picture. (To change the default settings, see
.)
To print a picture from a memory card or USB-connected device (ESP Office 2170
printer only) using the default settings:
1. Load photo paper (see
).
2. Insert the memory card into the memory card slot, or connect a digital camera
or USB flash drive to the front USB port.
IMPORTANT:
Do not use the memory card slot and the USB port at the same time.
3. Press
or
to select the picture you want to print.
4. Press
Start Black to print a black-and-white picture, or Start Color to print a
color picture.
The printer prints a single 4 x 6 in. / 10 x 15 cm picture.
IMPORTANT:
To prevent loss of data from your memory card, camera, or portable drive,
do not remove it from the printer while printing.
memory card slot
front USB port
(ESP Office 2170
printer only)