Kodak ESP OFFICE 2100 - Manual (Page 69)

www.kodak.com/go/aiosupport 63
KODAK ESP Office 2100 Series All-in-One Printer
Adjusting the settings and copying a photo
To copy a photo using settings other than the default settings:
1. Lift the scanner lid, and place the original photo face down in the right front
corner of the scanner glass.
IMPORTANT: Do not load photos in the Automatic Document Feeder (ADF).
2. Close the scanner lid.
3. Press Home.
4. Press to select Copy Photo, then press OK.
5. Press to select an option, then press or to change the setting.
Copy Photo Option Settings Description
Quantity 1 (default) to 99 The number of copies that print.
Copy Size 2 x 3
3.5 x 5
4 x 6 (default)
4 x 7
4 x 8
5 x 7
4 x 12
8 x 10
8.5 x 11 or A4
The printer enlarges or reduces the
original to make it the copy size you
select.
If the selected copy size is smaller
than the paper in the paper tray, the
printer automatically arranges the
pictures to best fit the paper size.
Some cropping may occur if the image
size and the selected print size are
different.
Plain Paper Quality Normal
(default) Good quality output; prints faster than
Best.
Best The highest quality, but the slowest
print speed.
Draft The fastest print speed, but the lowest
quality.