Lincoln Electric CLASSIC IM514-A - Manual (Page 16)

C-1 ACCESSORIES C-1
CLASSIC I
LINCOLN
ELECTRIC ELECTRIC
®
OPTIONAL FEATURES (field Installed)
Accessory Set (K702)
Includes 35 ft (10.7m) electrode and 30 ft (9.1m) work
cables, headshield, work clamp, and electrode holder.
CV Adapter (K384) K6090 thru -4 only
Provides constant voltage output for semiautomatic
welding. Select either CV or CC.
Linc-Thaw™ (L2964-1) - Includes meter and fuses to
protect welder when thawing frozen water pipes.
Pipe Thawing IS NOT a CSA approved procedure.
If not done properly, it can result in fire, explosion,
damage to wiring which may make it unsafe, dam-
age to pipes, burning up the welder, or other haz-
ards.
Do not use a welder to thaw pipe before reviewing
Lincoln Bulletin E695.1 (dated October 1987 or later.)
------------------------------------------------------------------------
Power Plug Kit (K802A)
Provides auxiliary plug for a 120V receptacle.
Remote Control
For “Stick” operation. contains switch, remote control
rheostat, and 100 ft (30.5m) or 25 ft (7.6m) cable.
Easy Installation.
K6090 thru -4
- 25 ft (K888-3)
- 100 ft (K888-4)
K6090-5, -6
- 100 ft (K924-1)
Trailer (K768)
For in-plant and yard towing at speeds under 10 mph.
37” (94cm) wheel track for narrow pathways &
entranceways.
Trailer (K780)
Rugged, two-wheeled trailer with brakes, lights, and
fenders. 54” (137cm) wheel track. For highway use,
consult applicable federal, state, and local laws
regarding possible additional requirements.
Trailer (K913)
Two-wheeled highway trailer with steel, torsion-bar
axle, 54” (137cm) wheel track. Low sway, low center-
of-gravity. Sturdy tread plate platform. Choice of 3
hitches. Add on fender & light package. For highway
use, consult applicable federal, state, and local laws
regarding possible additional requirements.
K913-1 Base Trailer
K913-2 Ball Hitch
K913-3 Lunette Eye Hitch
K913-4 Clevis Pin Hitch
K913-5 Fender & Light Kit
Wire Feed Module (K623-1) K6090-5, -6 only
Provides constant voltage (CV) output with improved
arc stability for Innershield welding. Also, excellent for
MIG welding. Easy Installation. Recommended wire
feeder is the LN-25.
WARNING
JULY97