Lexmark 1000 User Manual
Page 21
Diagnostic Information
2-9
4096-00X
3
Drive Train
Assembly
Check for binds in the gear train and paper feed
mechanism by removing the paper feed motor and
rotating the large gear by hand. If you notice a
bind, replace the drive train assembly. Check the
feed clutch gear on the left side of the auto sheet
feeder. Turn the clutch gear and check that it
rotates freely in one direction and locks when
turned in the opposite direction.
4
Auto Sheet
Feeder
Check the pick rollers for wear.
5
Mid-Frame Asm
Access Cover
Asm
Check the following for wear:
• Friction wheels
• Exit roller
• Star rollers
6
End-of-Forms
Flag and Spring
Check for binds or damage. If binds are found,
replace the end-of-forms flag.
7
End-of-Forms
Sensor
Check the sensor for dirt. Be sure the sensor lever
is in the down position. If the failure remains,
replace the system board.
FRU
Action