Lexmark 1000 - Manual (Page 33)

Repair Information 4-5
4096-00X
Front Cover Removal
1. Release the two hooks [A] in the illustration by using a
screwdriver.
2. While pushing the left side edge of the front cover upward,
release the hook [B]. Repeat this on the right side.
3. Slide the front cover forward and remove it from the rear cover.
Large Feed Roll Removal
1. Remove the front cover.
2. Remove the carrier frame from the base assembly.
3. Move the printhead carrier assembly to the left.
4. Remove the maintenance station assembly.
5. Turn and remove the retainers at both ends of the large feed
roller.
6. Remove the mid-frame assembly.
7. Remove the large feed roller from the carrier frame.
Maintenance Station Assembly Removal
1. Remove the front cover.
2. Release the two hooks on the rear of the maintenance station.
3. Remove the maintenance station by sliding it forward.