Lexmark 1000 - Manual (Page 26)

2-14 Service Manual
4096-00X
7 Carrier Transport Blurred print and voids can be caused by problems
in the carrier transport area. Check the following:
• Carrier transport belt for wear.
• Carrier guide rod for wear or dirt.
• Carrier to carrier frame engagement should be
lubricated with grease P/N 1329301, as well as
the carrier guide rod and bearing.
• Idler pulley parts for wear, damage, or
looseness.
8 Alignment Uneven vertical lines can be adjusted by
performing the bidirectional alignment. The user is
directed, through the Printer Control program, to
perform the bidirectional printing alignment, when
replacing a print cartridge.
FRU / Function Action