Lynx EPM-4 User Manual
Reference manual, Epm-4 (lynx)
Advertising
Table of contents
Document Outline
- Introduction
- Configuration / Operation
- Overview
- Initial Configuration and Setup
- CMOS Setup / Boot Procedure
- Console Redirection
- CMOS Setup / IDE Configuration
- CMOS Setup / Advanced Configuration
- D0000h 64k page function
- PLD register base I/O
- Force Ethernet 10-BaseT
- PS/2 Mouse (IRQ12)
- LPT1 (0378h)
- Parallel Port Mode
- CPU Speed
- Cache Mode
- Write Buffer
- GP Bus Timings
- COM1 (03F8h) RS-232
- COM2 (02F8h) RS-232
- COM3 (03E8h) RS-422/485
- COM4 (02E8h) RS-422/485
- GP Timer 0, GP Timer 1, Watchdog Timer
- PCI Interrupt A, B, C, and D
- Using Custom CMOS Defaults
- Reference
- Physical Dimensions
- External Connectors
- Jumper Block Locations
- Power Supply
- CPU
- System RAM
- CMOS RAM
- Real Time Clock
- Battery Backed Static RAM
- Serial Ports
- IDE Hard Drive / CompactFlash / CD-ROM Interface
- Utility Connector (J7)
- Parallel / Floppy Port
- Ethernet Interface
- Watchdog Timer
- Expansion Bus
- Memory and I/O Map
- Interrupt Configuration
- Special Control Register
- Revision Indicator Register
- Map and Paging Control Register
- Appendix A — CBL/CBR-5009
- Appendix B — References