Lexmark S800 User Manual
Page 48
If the printer is using a USB connection
•
For Windows users
EzPrint launches automatically when you insert the memory device. Follow the instructions on the computer
screen to transfer the photos to the computer or to print.
•
For Macintosh users
If you have set an application to launch when a memory device is connected to the computer, then the
application automatically launches. Follow the instructions on the computer screen to transfer the photos to
the computer or to print.
If the printer is using a wireless connection (select models only)
a
From the Memory Device screen, navigate to:
More Options > Connect to Computer > select your network printer
b
Transfer or print the photos:
•
For Windows users
EzPrint launches automatically when a connection is established. Follow the instructions on the computer
screen to transfer the photos to the computer or to print.
•
For Macintosh users
Select Yes to view images from the memory device. The Network Card Reader launches on the computer.
Follow the instructions on the computer screen to transfer the photos to the computer or to print.
Printing photos from a PictBridge-enabled digital camera
PictBridge is a technology available in most digital cameras that lets you print directly from your digital camera
without using a computer.
1
Insert one end of the USB cable into the camera.
Note: Use only the USB cable that came with the camera.
2
Insert the other end of the cable into the PictBridge port on the side of the printer.
Notes:
•
Make sure that the PictBridge-enabled digital camera is set to the correct USB mode. If the camera USB
selection is incorrect, then the camera is detected as a flash drive, or an error message is displayed on the
printer control panel. For more information, see the camera documentation.
•
The printer reads only one memory device at a time.
Printing
48