E-mailing, Setting up the printer to e-mail, Setting up the e-mail function – Lexmark S800 User Manual
Page 68: Changing the e-mail settings after setup
E-mailing
Your can use your printer to send e-mail to one or more recipients without using a computer. To do this, you can
either scan a document or photo and then send it as an e-mail, or you can attach a saved document or photo from
a memory device to an e-mail.
Before you can send e-mail using the printer control panel, you must first configure the e-mail settings of your printer.
Setting up the printer to e-mail
Setting up the e-mail function
1
From the home screen, navigate to:
> E-mail Setup > Yes
2
Enter your e-mail address, and then touch OK.
The printer compares your e-mail address to the list of known e-mail providers.
3
Follow the prompts on the display:
•
If your e-mail address matches one of the domains on the list, then the printer automatically assigns the SMTP
server settings.
Note: You may be required to enter your e-mail user name and password, depending on the e-mail address
you entered.
•
If the e-mail domain is not known, then the Advanced E-mail Setup Wizard appears on the display.
Enter the necessary information. Touch OK or Accept to save each item.
Changing the e-mail settings after setup
If you want to change the SMTP server settings
1
From the home screen, navigate to:
> E-mail Setup > SMTP Setup
2
Touch each item to enter the necessary information. Touch OK or Accept to save each item.
•
Server—Enter the name or address of the SMTP server.
•
Port—Enter the SMTP port.
•
Authentication Type—Select the authentication type for your e-mail account. If you select None, then you
will not be required to enter the User Name and Password. For more information, contact your e-mail provider
or your system support person.
Note: The Authentication Type screen may not appear on the display, depending on the e-mail address you
entered during e-mail setup.
•
Sender's Name—Enter your name.
•
User Name—Enter your e-mail address.
E-mailing
68