Scanning to a flash drive or memory card – Lexmark S800 User Manual
Page 62
2
Navigate to:
Scan > Scan to: Destination > Scan to Computer
3
Touch USB-Connected Computer or the name of a network computer.
The local or network computer is the destination that will receive the scan.
Notes:
•
If the printer is connected only to a local computer, then the printer will automatically set the local computer
as the default destination to receive the scan.
•
For Macintosh users, if you want to scan from a network computer, then you must first add the printer to the
Edit Device List dialog. For more information, click Library > Printers > Lexmark > Utilities, open Edit Device
List, and then click
.
•
You may be prompted to enter a PIN if the computer requires it.
•
To assign a computer name and a PIN to the computer, see the Help for the printer software associated with
your operating system.
4
Select the output file type you want to create, and then touch Accept.
5
Touch More Options to select the color, resolution quality, and the original image size. If necessary, touch
Accept each time you make a selection.
6
Press
.
The scan is complete when a message appears on the printer control panel indicating that the file you scanned has
been saved.
Scanning to a flash drive or memory card
Before you begin, make sure your flash drive or memory card is not write-protected.
1
Load the original document.
The Instant Preview screen appears.
2
Navigate to:
Scan > Scan to: Destination
3
Insert the flash drive or memory card.
Notes:
•
The printer reads only one memory device at a time.
•
If a flash drive is inserted into the USB port while a memory card is in the card slot, then a message appears
on the display prompting you to select which memory device to use.
4
Select the output file type you want to create.
Note: Select the Multiple PDF file type if you want to scan multiple pages and save them as one file.
5
Touch More Options to select the color, resolution quality, and original image size. If necessary, touch Accept
each time you make a selection.
6
Press
.
The scan is complete when a message appears on the printer control panel indicating that the file you scanned has
been saved.
Scanning
62