Troubleshooting & repair, Case removal procedure (continued) – Lincoln Electric LN-25 SVM179-B User Manual
Page 54
Advertising
FIGURE F.1 – CASE REMOVAL
CASE REMOVAL PROCEDURE (CONTINUED)
PROCEDURE
1. Remove the input power from the LN25 PRO
unit.
2. Using the 1/4-20 nut driver, remove the 8
screws holding the control box. Loosen the
cord grip connector, and slide the control box
assembly out of the case. See Figure F.1
TROUBLESHOOTING & REPAIR
F-10
F-10
LN-25™ PRO
Advertising