Lucent Technologies 7820-0657-001 - Manual (Page 15)

DSLPipe DSU (SDSL) User’s Guide 2-1
Installation
The DSLPipe DSU (SDSL) modem is easy to install. Open the package and
identify the two cables, then set up the unit, and check the activity of the LED
status lights.
Checking package contents
The package in which you received your DSLPipe DSU should contain the
following items. See Figure 2-1.
1 DSLPipe DSU. The model name, DSL-HST-DSU, is printed on the bottom
of the unit.
2 V.35 to DB-25 connector
3 WAN cable with RJ-11 modular plug connectors
4 DSLPipe DSU (SDSL) User’s Guide
5 Power supply
Checking package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Setting up the DSLPipe DSU. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Connecting the cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
Checking the activity of the LED lights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
2