Land Pride Rotary Cutters RCR1884 User Manual
Page 10
8
Introduction
RCR1884 Series Rotary Cutter 312-880M
2/03/12
Introduction
Owner Assistance
The Warranty Registration card should be filled out by
the dealer at the time of purchase. This information is
necessary to provide you with quality customer service.
If customer service or repair parts are required contact a
Land Pride dealer. A dealer has trained personnel, repair
parts and equipment needed to service the cutter.
The parts on your Rotary Cutter have been specially
designed and should only be replaced with genuine Land
Pride parts. Therefore, should your cutter require
replacement parts go to your Land Pride Dealer.
Serial Number
Model No. _____________Serial No. _______________
For quick reference and prompt service, record model
number and serial number in the spaces provided above
and again on warranty page 35. Always provide model
number and serial number when ordering parts and in all
correspondences with your Land Pride dealer. Refer to
Figure 1 for location of your serial number plate.
Serial Number Plate Location
Figure 1
Further Assistance
Your dealer wants you to be satisfied with your new
Rotary Cutter. If for any reason you do not understand
any part of this manual or are not satisfied with the
service received, the following actions are suggested:
1.
Discuss the matter with your dealership service
manager making sure he is aware of any problems
you may have and that he has had the opportunity to
assist you.
2.
If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
problem and request assistance.
3.
For further assistance write to:
Land Pride
Service Department
P.O. Box 5060
Salina, KS 67402-5060
E-mail address
30839
Land Pride welcomes you to the growing family of new
product owners.
This Rotary Cutter has been designed with care and built
by skilled workers using quality materials. Proper
assembly, maintenance, and safe operating practices will
help you get years of satisfactory use from the Rotary
Cutter.
Application
Land Pride’s RCR1884 Series Rotary Cutter is built and
designed by Land Pride for cutting on gentle slopes or
slightly contoured right-of-ways, pastures, around the
farm or around town. The 84" cutting width is compatible
with maneuverable 45 to 90 horsepower tractors with 540
rpm PTO speed. The cutter has a Category I and
Category II three-point hitch and is Quick Hitch
compatible. It is offered with a standard ASAE Category
4 driveline with slip-clutch protection and a single or dual
rear laminated tailwheel.
The RCR1884 cutter cuts through grass, weeds and light
brush up to 2" in diameter with a cutting height range of
2" to 11". Cutting blade tip speed is
17,113
fpm. It
includes a 10 ga. (.135" thick) oval pan stump jumper and
welded on full length skid shoes. A rear metal band
shield is standard equipment. Optional shields are front
rubber guard, front chain guard and rear chain guard.
See “Specifications & Capacities” on page 30 and
“Features & Benefits” on page 32 for additional
information and performance enhancing options.
Using This Manual
•
This Operator’s Manual is designed to help familiarize
you with safety, assembly, operation, adjustments,
troubleshooting, and maintenance. Read this manual
and follow the recommendations to help ensure safe
and efficient operation.
•
The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
•
To order a new Operator’s or Parts Manual contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge from our website at
www.landpride.com.
Terminology
“Right” or “Left” as used in this manual is determined by
facing the direction the machine will operate while in use
unless otherwise stated.
Definitions:
IMPORTANT: A special point of information related
to the following topic. Land Pride’s intention is this
information must be read & noted before continuing.
NOTE: A special point of information that the
operator should be aware of before continuing.