Safety labels, Table of contents safety labels, 543c – Land Pride Rotary Cutters RCR1884 User Manual

Page 6

Advertising
background image

4

Important Safety Information

RCR1884 Series Rotary Cutter 312-880M

2/03/12

Table of Contents

Safety Labels

Your Rotary Cutter comes equipped with all safety labels in
place. They were designed to help you safely operate your
implement. Read and follow their directions.

1.

Keep all safety labels clean and legible.

2.

Replace all damaged or missing labels. To order new
labels go to your nearest Land Pride dealer or visit our
dealer locator at landpride.com.

3.

Some new equipment installed during repair requires
safety labels to be affixed to the replaced component as

818-543C

Danger: Guard Missing

24584

24651

specified by Land Pride. When ordering new components
make sure the correct safety labels are included in the
request.

4.

Refer to this section for proper label placement.
To install new labels:
a.

Clean the area the label is to be placed.

b.

Spray soapy water on the surface where the label is to
be placed.

c.

Peel backing from label. Press firmly onto the surface.

d.

Squeeze out air bubbles with the edge of a credit card.

Advertising