LG LRG30357ST - Manual (Page 26)

26
O P E R AT I N G I N S T RU C T I O N S
NOTE: If you would like to check the times you have
set, touch the DELAY START pad to check the start
time you have set or touch the COOK TIME pad to
check the length of cooking time you have set.
When the oven turns ON at the time of day you set,
the display will show the cooking time countdown
and the changing temperature starting at 100°F.
(The temperature display will start to change once
the oven temperature reaches 100°F.) When the oven
reaches the temperature you set, 3 beeps will sound.
The oven will continue to cook for the set amount of
time, then turn off automatically, unless the Cook and
Hold
feature was set. See the Special Features of
Your Oven Control section.
After the oven turns off, the end-of-cycle tone will
sound.
Touch the CLEAR/OFF pad to clear
the display if necessary. Remove
the food from the oven. Remember,
even though the oven turns off
automatically, food left in the oven
will continue cooking after the oven
turns off.
8
HOW TO SET A DELAYED START AND AUTOMATIC STOP (continued)
USING THE TIMED CONVECTION BAKING AND
ROASTING FEATURES
(on some models)
SPECIAL FEATURES OF YOUR OVEN CONTROL
12 HOUR SHUT-OFF
With this feature, should you forget and leave the
oven on, the control will automatically turn off the
oven after 12 hours during baking functions or
after 3 hours during a broil function.
If you wish to turn OFF this feature, follow the
steps below.
Touch the BAKE and BROIL
HI/LO
pads at the same time
for 3 seconds until the display
shows SF.
Touch the DELAY START pad.
The display will show 12 shdn (12
hour shut-off). Touch the DELAY
START
pad again and the display
will show no shdn (no shut-off).
Touch the START pad to activate
the no shut-off and leave the
control set in this special
features mode.
1
2
Your new touch pad control has additional
features that you may choose to use. The
following pages describe these features and
how you may activate them.
The special feature modes can only be
activated while the display is showing the time
of day. They remain in the control’s memory
until the steps are repeated.
When the display shows your choice, touch the
START pad. The special features will remain in
memory after a power failure.
and
3
SELECT FAHRENHEIT OR CELSIUS
TEMPERATURE
Your oven control is set to use the Fahrenheit
temperature selections but you may change
this to use the Celsius selections.
Touch the BAKE and BROIL
HI/LO
pads at the same time
for 3 seconds until the display
shows SF.
Touch the BROIL HI/LO and
COOK TIME pads at the same
time. The display will show F
(Fahrenheit).
Touch the BROIL HI/LO and
COOK TIME pads again at the
same time. The display will
show C (Celsius).
Touch the START pad.
1
2
and
3
4
and
and