Lucent Technologies Host-Based Controller Modem AT - Manual (Page 38)

Host-Based Controller Modem Data Addendum
AT Command Set June 15, 1998
AT Fax Commands Reference (continued)
Lucent Technologies Inc. Version 1.0 38
+FTM=<m> Transmit FAX Data with <m> Carrier
This command causes the modem to transmit data at the modulation specified by <m>. The following table
shows the values you can enter for this command and the meaning of those values.
Command Option Modulation Speed (bits/s)
+FTM=3 V.21 Channel 2 300
+FTM=24 V.27ter 2400
+FTM=48 V.27ter 4800
+FTM=72 V.29 7200
+FTM=96 V.29 9600
+FTM=73 V.17 7200
+FTM=74 V.17 (short train) 7200
+FTM=97 V.17 9600
+FTM=98 V.17 (short train) 9600
+FTM=121 V.17 12000
+FTM=122 V.17 (short train) 12000
+FTM=145 V.17 14400
+FTM=146 V.17 (short train) 14400
+FRM=<m> Receive FAX Data with <m> Carrier
This command causes the modem to receive data at the modulation specified by <m>.
Command Option Modulation Speed (bits/s)
+FRM=3 V.21 Channel 2 300
+FRM=24 V.27ter 2400
+FRM=48 V.27ter 4800
+FRM=72 V.29 7200
+FRM=96 V.29 9600
+FRM=73 V.17 7200
+FRM=74 V.17 (short train) 7200
+FRM=97 V.17 9600
+FRM=98 V.17 (short train) 9600
+FRM=121 V.17 12000
+FRM=122 V.17 (short train) 12000
+FRM=145 V.17 14400
+FRM=146 V.17 (short train) 14400