Lucent Technologies Host-Based Controller Modem AT User Manual
Page 5
Data Addendum
Host-Based Controller Modem
June 15, 1998
AT Command Set
AT Command Summary (continued)
Version 1.0
Lucent Technologies Inc.
5
Result Code
Numeric
Description
CONNECT 29333 EC*
101
Connection at 29333 bit/s (V.90 mode)
CONNECT 30666 EC*
102
Connection at 30666 bit/s (V.90 mode)
CONNECT 33333 EC*
103
Connection at 33333 bit/s (V.90 mode)
CONNECT 34666 EC*
104
Connection at 34666 bit/s (V.90 mode)
CONNECT 37333 EC*
105
Connection at 37333 bit/s (V.90 mode)
CONNECT 38666 EC*
106
Connection at 38666 bit/s (V.90 mode)
CONNECT 41333 EC*
107
Connection at 41333 bit/s (V.90 mode)
CONNECT 42666 EC*
108
Connection at 42666 bit/s (V.90 mode)
CONNECT 45333 EC*
109
Connection at 45333 bit/s (V.90 mode)
CONNECT 46666 EC*
110
Connection at 46666 bit/s (V.90 mode)
CONNECT 49333 EC*
111
Connection at 49333 bit/s (V.90 mode)
CONNECT 50666 EC*
112
Connection at 50666 bit/s (V.90 mode)
CONNECT 53333 EC*
113
Connection at 53333 bit/s (V.90 mode)
CONNECT 54666 EC*
114
Connection at 54666 bits/s (V.90 mode)
* EC only appears when the extended result codes configuration option is enabled. EC is replaced by one of the following symbols,
depending upon the error control method used:
V42bis—V.42 error control and V.42bis data compression.
V42—V.42 error control only.
MNP 5—MNP class 4 error control and MNP class 5 data compression.
MNP 4—MNP class 4 error control only.
NoEC—No error control protocol.