Land Pride Skid Steer Rakes SR2690 - Manual (Page 23)

21
Section 4: Maintenance & Lubrication
4/05/12 SR2672 & SR2690 Skid Steer Powered Rakes 321-004M
Table of Contents
Drive Chain
Fill through top fill plug and check quantity at lower plug.
Type of Lubrication: 80-90 Gear Lube
Quantity: 2 1/2 pints (Gear Lube will run out of lower plug
when full.)
30937
Fill Plug
Lower Plug
As
Required
Pivot Arm Bushings (8 Places)
Grease pivot arm bushings every 25 hours
Two grease zerks for each pivot arm
Type of Lubrication: Multi-Purpose Grease
Quantity: Add grease until grease begin to emerge from
either side of the bushings.
Non-Drive Bearing
Grease gauge non-drive bearing every 10 hours
One grease zerk inside skid shoe
Type of Lubrication: Multi-Purpose Grease (Remove Skid
Shoe to grease)
Quantity: Add grease until grease begin to emerge from
either side of the axle.
25
Hours
25
Hours
24533
Remove Skid Shoe
To Grease
30665