Land Pride Skid Steer Rakes SR2690 - Manual (Page 26)

24
Section 6: Features & Benefits
SR2672 & SR2690 Skid Steer Powered Rakes 321-004M 4/05/12
Table of Contents
SR26 Series (Skid Steer)
Features Benefits
Working width 72" & 90"
Hydraulics 72": 11 GPM at 2200 psi
90": 15 GPM at 2500 psi
15 cu. in. Displacement motor Able to handle high torque loads in heavy conditions.
72" = 3" x 3" x 1/4" Tube Frame
90" = 6" x 3" x 1/4" Tube Frame Superior in strength.
Angling adjustment:
22 degrees left & 18 degrees right Angling allows proper flow of material wanting to be windrowed to allow for easy
collection of large rocks and debris.
3/4" x 1 1/2"
Carbide tipped stud roller Carbide tipped studs are very tough, used in the mining industry, this offers a long life
to the studs. Studs can be replaced one at a time.
16.5" x 6.5" Gauge wheels with
sealant Easy to adjust vertically to set working depth. Has tall and wide tires that keep turning
in fluffy soil. Sealant helps seal against punctures.
End plates with storage End plates can be used to hold dirt to aid in filling low spots. Easily store the end
plates on the Powered Rake so that they are always with the Rake when needed.
Two material control deflectors Material control deflectors determine what size of material to let pass through the
roller and what size to move out. Two deflectors allow for forward and reverse rotation
of the roller.
Bi-directional roller Enables more complete finish and control
Variable roller speed 180 to 260 rpm variable roller speed is controlled by the skid steer hydraulics and can
be used in tight areas to lessen the possibility of flying debris.
#50 Double continuous roller
chain Double chain can take the fluctuation loads from the roller due to varying ground
conditions.
Cast Iron chain guard housing Strong enough to protect chain in harsh conditions.
Drive chain enclosed in oil bath A small amount of oil keeps the chain and sprockets lubricated to keep abrasion to a
minimum.
Replaceable skid shoes Skid shoes protect larger and vital parts of the unit. As they wear due to soil contact,
they can easily be replaced.
Hydraulic Motor Warranty 2 Years parts and labor. Shows our confidence in the gearbox integrity.
Universal fit Universal fit with new and late model skid steer units.
Section 6: Features & Benefits