Land Pride Skid Steer Rakes SR2690 - Manual (Page 24)

22
Section 5: Specifications & Capacities
SR2672 & SR2690 Skid Steer Powered Rakes 321-004M 4/05/12
Table of Contents
Skid Steer Powered Rakes
SR2672 SR2690
Hydraulic Drive Requirements 11 GPM at 2200 psi minimum 15 GPM at 2500 psi minimum
Maximum Hydraulic Pressure 3500 psi 3500 psi
Non-Angled Working Width 82 1/2" 100"
Angled Working Width 72 1/2" 90"
Non-Angled Length 72 1/2"
Overall Height 41 1/8" 41 1/8"
Machine Weight 930 lbs. 1200 lbs.
Direction of Travel Bi-directional
Material Control Blade 2 each - 1/2" x 5" Urethane
Spike Roller 9 3/8" Dia. with 3/4" x 1 1/2" Carbide Tipped Studs
Roller Speed Variable from 180 - 260 RPM
Roller End Bearings Roller Bearings
Drive Chain #50 Double Continuous Roller Chain, High Tensile,
Enclosed in oil bath
Angle Adjustment Hydraulically controlled
18 degrees right and 22 degrees left
Angle Cylinder 2" X 8"
End Plates Standard, Removable with Storage Rack
Gauge Wheels / Depth Control 2 Each 16.5" x 6.5" Air Tires W/ sealant and 3/4" Roller bearings and Spacer height
adjustment
Skid Shoes Replaceable
Chain Case Lubrication 2 1/2 pints of 80-90 weight Gear Lube -
Add gear lube until it escapes from lower plug hole.
Section 5: Specifications & Capacities