Lennox Hearth S1300 - Manual (Page 28)

28 Contact Groups
Add or Remove Contacts from Groups
1. From Groups, highlight a group.
2. Select Options > Edit.
3. If you are modifying a group you created,
select Next. Otherwise, go to the next step.
4. Select contacts from the list provided. A
checkmark appears next to each contact in
the group. Press the OK key to add or
remove checkmarks.
5. When finished, select Done.
Assign Ringers to Groups
1. From Groups, select a group.
2. At the group details screen, scroll to the
group name.
3. Select Options > Ringer > Assign Ringer
and a ringer from the list. (Scroll to play the
ringers.)
Assign Message Tones to Groups
1. From Groups, select a group.
2. At the group details screen, scroll to the
group name.
3. Select Options > Msg Tone > Assign Msg
Tone and a ringer from the list. (Scroll to
play the ringers.)
Assign Pictures to Groups
1. From Groups, select a group you have
created.
2. At the group details screen, scroll to the
group name.
3. Select Options > Picture > Assign
Picture to assign a picture.
Create a Message Group
You can create a group specifically for messaging,
based on a contact group.
1.
From Groups, highlight a group.
2. Select Options > Create Msg Group.
3. Modify the name for the group and select
Next.
4. Select contacts from the list provided. A
checkmark appears next to each contact in
the group. Press the OK key to add or
remove checkmarks.
5. When finished, select Done.
Your new message group appears the next time
you view your message groups list.
Erase a Group
1. From Groups, highlight a group.
2. Select Options > Erase > Yes.
Erase All Groups
From Delete All, select Groups Only > Yes >
Yes to erase all your groups.
Note: You cannot recover deleted information or
erase preloaded groups.
82-L2609-2EN.book Page 28 Monday, July 13, 2009 2:48 PM