Lennox Hearth S1300 - Manual (Page 35)

User Guide 35
Keyguard
Enable Auto Keyguard
Use Keyguard to lock the keypad immediately or
to automatically lock the keypad after a period of
inactivity to prevent accidental key presses.
From Keyguard, select one of the following:
• Guard now to immediately lock the keypad.
• 30 secs auto guard to lock the keypad after
30 seconds of inactivity.
• 1 min auto guard to lock the keypad after 1
minute of inactivity.
• 5 mins auto guard to lock the keypad after
5 minutes of inactivity.
Note: You can also activate keyguard by pressing
and holding the * Shift key.
Unlock Keyguard
From the home screen, select Unlock and press
the * Shift key to unlock the keypad.
Enable Auto-Hyphenation
Auto-hyphenation, when enabled, automatically
inserts hyphens into your phone numbers to be
consistent with the U.S. dialing plan (or the North
American Numbering Plan).
From Auto-Hyphen, select Enabled to turn on
auto-hyphenation.
Use 1-Touch Dialing
The 1-Touch Dialing feature is the fastest way to
call a speed dial location. To call a contact with
speed dial, press and hold the speed dialing
location.
If it is a two-digit location, press the first digit
briefly, then press and hold the second digit.
Note: To use 1-Touch dialing, you must enable
1-Touch dialing on your phone and have a speed
dial location assigned to a contact.
From 1-Touch Dialing, select Enabled to turn
on 1-touch dialing.
Answer Hold
Enable Hold Call
Use Answer Hold to place incoming calls on
hold until you are ready to answer them.
1.
From Answer Hold, select Enabled.
If you have not recorded a hold message, you
need to record one, such as “Please hold. I’ll
answer in a minute.”
2. Record the message twice, as prompted.
3. Select Save or Options and one of the
following:
– Play to replay your message.
– Re-Record to record your message
again.
– Exit to exit.
The next time a call comes in, you can place it on
hold.
82-L2609-2EN.book Page 35 Monday, July 13, 2009 2:48 PM