Lennox Hearth S1300 - Manual (Page 40)

40 Accessories
Keypad
From Keypad, you can modify the following
settings.
Set Key Press Sounds
From Key Sounds, select Tone, Click, or Off to
set the sounds you hear when pressing the
keypad.
Set Key Tone Length
From Key Length, select Normal or Long to set
the length of the keypad tone.
Accessories
Set Headset Sounds
With a headset attached to your phone, you can
play the ringer through the headset or phone
speaker.
From Headset Sounds, select Out of phone
(ringing from the phone speaker) or Out of
headset (ringing from the headset).
Enable Auto-Answer
From Auto-Answer, select After 5 Seconds.
The phone automatically answers after five
seconds with a headset attached.
Connect to TTY Device
You can connect the phone to a teletype (TTY)
device for the hearing impaired. (TTY device sold
separately.)
Note: Enable TTY only when using the phone with
a TTY device.
1.
Connect the TTY device to your phone.
2. From TTY Device, select OK to clear the
notification.
3. Select one of the following:.
– TTY Off disables TTY.
– TTY On enables TTY devices.
– TTY On + Talk enables TTY devices and
voice carry over.
– TTY On + Hear enables TTY devices
and hearing carry over.
Note: You can also enter ##889 with your
keypad and select TTY to enable TTY.
Set Com Port Speed
From Com Port Speed, select a data rate at
which your phone connects to a laptop or PC.
Check with your service provider for details.
Connect to Hearing Aid Device
With a T-coil hearing aid device (sold separately)
connected, you can enable the hearing aid
feature.
1.
Connect the T-coil hearing aid device to your
phone.
2. From Hearing Aid, select OK > Enabled.
82-L2609-2EN.book Page 40 Monday, July 13, 2009 2:48 PM