Lucent Technologies Ethereal - Manual (Page 107)

• Print command specifies that a command be used for printing.
Note!
These Print command fields are not available on windows
platforms.
This field specifies the command to use for printing. It is typically lpr.
You would change it to specify a particular queue if you need to print to a
queue other than the default. An example might be:
lpr -Pmypostscript
This field is greyed out if Output to file: is checked above.
Packet Range Select the packets to be printed, see Section 5.8, “The Packet Range frame”
Packet Format Select the output format of the packets to be printed. You can choose, how
each packet is printed, see
Figure 5.11, “The "Packet Format" frame”
File Input / Output and Printing
93