Lucent Technologies Ethereal - Manual (Page 166)

dialog box was opened.
4. Show Current Open a dialog box showing the current list of user specified decodes.
5. OK Apply the currently selected decode and close the dialog box.
6. Apply Apply the currently selected decode and keep the dialog box open.
7. Cancel Cancel the changes and close the dialog box.
9.4.3. Show User Specified Decodes
This dialog box shows the currently active user specified decodes.
Figure 9.7. The "Decode As: Show" dialog box
1. OK Close this dialog box.
2. Clear Removes all user specified decodes.
Customizing Ethereal
152