Important safety instructions, Warning for your protection read the following – Lexicon PCM92 User Manual

Page 2

Advertising
background image

IMPORTANT SAFETY INSTRUCTIONS

WARNING FOR YOUR PROTECTION

READ THE FOLLOWING:

KEEP THESE INSTRUCTIONS

HEED ALL WARNINGS

FOLLOW ALL INSTRUCTIONS

THE APPARATUS SHALL NOT bE ExPOSED

TO DRIPPING OR SPLASHING LIqUID AND

NO ObjECT FILLED WITHI LIqUID, SUCH AS

vASES, SHALL bE PLACED ON THE APPARA-

TUS.

CLEAN ONLY WITH A DRY CLOTH.

DO NOT bLOCK ANY OF THE vENTILATION

OPENINGS. INSTALL IN ACCORDANCE

WITH THE MANUFACTURER’S INSTRUC-

TIONS.

DO NOT INSTALL NEAR ANY HEAT SOURC-

ES SUCH AS RADIATORS, HEAT REGISTERS,

STOvES, OR OTHER APPARATUS (INCLUD-

ING AMPLIFIERS) THAT PRODUCE HEAT.

ONLY USE ATTACHMENTS/ACCESSORIES

SPECIFIED bY THE MANUFACTURER.

UNPLUG THIS APPARATUS DURING LIGHT-

NING STORMS OR WHEN UNUSED FOR

LONG PERIODS OF TIME.

Do not defeat the safety purpose of the polar-

ized or grounding-type plug. A polarized plug

has two blades with one wider than the other. A

grounding type plug has two blades and a third

grounding prong. The wide blade or third prong

are provided for your safety. If the provided plug

does not fit your outlet, consult an electrician

for replacement of the obsolete outlet.

Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the apparatus.

Use only with the cart stand, tripod bracket, or

table specified by the manufacture, or sold with

the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to

avoid injury from tip-over.

Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has

been damaged in any way, such as power-supply

cord or plug is damaged, liquid has been spilled

or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

POWER ON/OFF SWITCH: If the equipment

has a Power switch, the Power switch used in

this piece of equipment DOES NOT break the

connection from the mains.

MAINS DISCONNECT: The plug shall remain

readily operable. For rack-mount or installation

where plug is not accessible, an all-pole mains

switch with a contact separation of at least 3

mm in each pole shall be incorporated into the

electrical installation of the rack or building.

FOR UNITS EqUIPPED WITH ExTERNALLY

ACCESSIbLE FUSE RECEPTACLE: Replace fuse

with same type and rating only.

MULTIPLE-INPUT vOLTAGE: This equipment

may require the use of a different line cord,

attachment plug, or both, depending on the avail-

able power source at installation. Connect this

equipment only to the power source indicated

on the equipment rear panel. To reduce the risk

of fire or electric shock, refer servicing to quali-

fied service personnel or equivalent.

If connected to 240v supply, a suitable CSA/UL

certified power cord shall be used for this supply.

Safety InStructIonS

Notice For customers iF Your uNit is equipped With A poWer cord.
WArNiNG: this AppLiANce shALL Be coNNected to A mAiNs socKet

outLet With A protectiVe eArthiNG coNNectioN.
the cores in the mains lead are coloured in accordance with the following code:
GREEN and YELLOW - Earth BLUE - Neutral BROWN - Live
As colours of the cores in the mains lead of this appliance may not cor-

respond with the coloured markings identifying the terminals in your plug,

proceed as follows:

the core which is coloured green and yellow must be connected to the

terminal in the plug marked with the letter e, or with the earth symbol,

or coloured green, or green and yellow.

the core which is coloured blue must be connected to the terminal

marked N or coloured black.

the core which is coloured brown must be connected to the terminal

marked L or coloured red.

this equipment may require the use of a different line cord, attachment

plug, or both, depending on the available power source at installation.

if the attachment plug needs to be changed, refer servicing to qualified

service personnel who should refer to the table below. the green/yellow

wire shall be connected directly to the units chassis.

CONDUCTOR

WIRE COLOR

Normal

Alt

L

LIVE

BROWN

BLACK

N

NEUTRAL

BLUE

WHITE

E

EARTH GND

GREEN/YEL

GREEN

WARNING: if the ground is defeated, certain fault conditions in the unit

or in the system to which it is connected can result in full line voltage

between chassis and earth ground. severe injury or death can then result if

the chassis and earth ground are touched simultaneously.

Advertising