Lexicon PCM92 - Manual (Page 29)

23
4. Name the preset chain. Turn the Select knob to select a letter to change.
5. Turn Knob A to change the selected letter.
Press Knob A to toggle between uppercase, lowercase, special characters
and
numbers.
Press Knob B to clear the selected character space.
Press Knob C to insert a space.
6. Press the Select knob to save the preset chain with its new name.
To add presets to a preset chain:
1. In the Preset Chain Configuration menu, highlight a preset chain and
press the Select knob.
2. Press Knob A.
3. Highlight a preset category and press the Select knob.
4. Highlight a preset and press the Select knob.
5. Repeat steps 2-4 until you are finished adding presets.
To use a preset chain:
1. With a System Preset loaded, press Knob A. The Activate Preset Chain
menu appears.
2. Turn the Select knob to highlight the desired preset chain; press the
Select knob to activate it.
3. Use a footswitch to change presets, bypass the preset, or set the tempo.
4. Press the Back button or Knob A to exit this menu.
hoW to coNtRoL PARAMeteRS WIth A Foot PedAL
To assign a parameter to a foot pedal:
1. Using a 1/4” TRS cable, connect a foot pedal to the Foot Control jack
on the back panel.
2. With any Machine Preset loaded, press the Select knob.
3. Highlight Foot pedal Assignments and press the Select knob.
4. Press Knob A to add a new parameter.
5. Turn the Select knob to select a parameter category, and press the Select
knob to open that category.
6. Turn the Select knob to select a parameter, and press the Select knob to select it.
7. Press the Back button to save the settings.
After you’ve assigned a parameter to the foot pedal, you can specify what
value the parameter has when the foot pedal is in the toe up or toe down
position. To do this, follow these steps:
1. With any Machine Preset loaded, press the Select knob.
2. Highlight Foot pedal Assignments and press the Select knob.
3. Highlight a parameter and press the Select knob.
4. Turn Knob A to assign a value to the foot pedal’s toe up position.
5. Turn Knob B to assign a value to the foot pedal’s toe down position.
6. Press the Back button to save the settings.